7 Myths About This Tricky Yet Totally Useful Kitchen Staple

Photo: Courtesy of Serious Eats.
By J. Kenji López-Alt

If you haven't noticed, I'm a big fan of the cast iron. When I packed up my apartment last spring and had to live for a full month with only two pans in my kitchen, you can bet your butt that the first one I grabbed was my trusty cast-iron skillet. I use it for the crispest potato hash and for giving my steaks a crazy-good sear. I use it for baking garlic knots or cornbread or the easiest, best pan pizza you'll ever bake (just kidding, this might be the easiest pizza). I use it for a complete chicken dinner with insanely crisp skin and for crispy, creamy pasta bakes.

Point is, it's a versatile workhorse, and no other pan is even in the same league.

But, there's also a mysterious, myth-packed lore when it comes to cast-iron pans. On the one hand, there're the folks who claim you've got to treat your cast-iron cookware like a delicate little flower. On the other, there are the macho types who chime in with their my cast iron is hella nonstick or goddamn, does my pan heat evenly!  In the world of cast iron, there are unfounded, untested claims left, right, and center. It's time to put a few of those myths to rest.

Myth #1: Cast iron is difficult to maintain.

The Theory: Cast iron is a material that can rust, chip, or crack easily. Buying a cast-iron skillet is like adopting a newborn baby and a puppy at the same time. You're going to have to pamper it through the early stages of its life, and be gentle when you store it — that seasoning can chip off!

The Reality: Cast iron is tough as nails! There's a reason why there are 75-year-old cast-iron pans kicking around at yard sales and antiques shops. The stuff is built to last, and it's very difficult to completely ruin it. Most new pans even come pre-seasoned, which means that the hard part is already done for you and you're ready to start cooking right away. As for storing it? If your seasoning is built up in a nice, thin, even layer like it should be, then don't worry. It ain't gonna chip off. I store my cast-iron pans nested directly in each other. Guess how many times I've chipped their seasoning? Try doing that to your nonstick skillet without damaging the surface.
Advertisement

Myth #2: Cast iron heats really evenly.

The Theory: Searing steaks and frying potatoes requires high, even heat. Cast iron is great at searing steaks, so it must be great at heating evenly, right?

The Reality: Actually, cast iron is terrible at heating evenly. The thermal conductivity — the measure of a material's ability to transfer heat from one part to another — is around a third to a quarter that of a material like aluminum. What does this mean? Throw a cast-iron skillet on a burner, and you end up forming very clear hot spots right on top of where the flames are, while the rest of the pan remains relatively cool. The main advantage of cast iron is that it has very high volumetric heat capacity, which means that once it's hot, it stays hot. This is vitally important when searing meat.

To really heat cast iron evenly, place it over a burner and let it preheat for at least 10 minutes or so, rotating it every once in a while. Alternatively, heat it up in a hot oven for 20 to 30 minutes (but remember to use a potholder or dish towel!). For more on this stuff, check out this great article by Dave Arnold at Cooking Issues. The other advantage is its high emissivity — that is, its tendency to expel a lot of heat energy from its surface in the form of radiation. Stainless steel has an emissivity of around .07. Even when it's extremely hot, you can put your hand close to it and not feel a thing. Only the food directly in contact with it is heating up in any way. Cast iron, on the other hand, has a whopping .64 emissivity rating, which means that when you're cooking in it, you're not just cooking the surface in contact with the metal, but cooking a good deal of food above it as well. This makes it ideal for things like making hash or pan-roasting chicken and vegetables.
Photo: Courtesy of Serious Eats.
Myth #3: My well-seasoned cast-iron pan is as nonstick as any nonstick pan out there.

The Theory: The better you season your cast iron, the more nonstick it becomes. Perfectly well-seasoned cast iron should be perfectly nonstick.

The Reality: Your cast-iron pan (and mine) may be really, really, really nonstick — nonstick enough that you can make an omelet in it or fry an egg with no problem — but let's get serious here. It's not anywhere near as nonstick as, say, Teflon, a material so nonstick that we had to develop new technologies just to get it to bond to the bottom of a pan. Can you dump a load of cold eggs into your cast-iron pan, slowly heat it up with no oil, then slide those cooked eggs right back out without a spot left behind? Yeah, didn't think so. Because, you can do that in Teflon. That said, macho posturing aside, so long as your cast-iron pan is well seasoned and you make sure to preheat it well before adding any food, you should have no problems whatsoever with sticking.

Photo: Courtesy of Serious Eats.
Myth #4:  You should NEVER wash your cast-iron pan with soap.

The Theory: Seasoning is a thin layer of oil that coats the inside of your skillet. Soap is designed to remove oil; therefore, soap will damage your seasoning.

The Reality: Seasoning is actually not a thin layer of oil, it's a thin layer of polymerized oil, a key distinction. In a properly seasoned cast-iron pan, one that has been rubbed with oil and heated repeatedly, the oil has already broken down into a plastic-like substance that has bonded to the surface of the metal. This is what gives well-seasoned cast iron its nonstick properties, and as the material is no longer actually an oil, the surfactants in dish soap should not affect it. Go ahead and soap it up and scrub it out.

The one thing you shouldn't do? Let it soak in the sink. Try to minimize the time it takes from when you start cleaning to when you dry and re-season your pan. If that means letting it sit on the stovetop until dinner is done, so be it.

Myth #5: Don't use metal utensils on your cast-iron pan.

The Theory: The seasoning in cast-iron pans is delicate and can easily flake out or chip if you use metal. Stick to wood or nylon utensils.

The Reality: The seasoning in cast iron is actually remarkably resilient. It's not just stuck to the surface like tape, it's actually chemically bonded to the metal. Scrape away with a metal spatula, and unless you're actually gouging out the surface of the metal, you should be able to continue cooking in it with no issue.

So, you occasionally see flakes of black stuff chip out of the pan as you cook in it? It's possible that's seasoning, but unlikely. In order to get my cast-iron pan's seasoning to flake off, I had to store it in the oven for a month's worth of heating and drying cycles without re-seasoning it before I started to see some scaling.

More likely, those flakes of black stuff are probably carbonized bits of food that were stuck to the surface of the pan because you refused to scrub them out with soap last time you cooked.
Advertisement
Myth #6: Modern cast iron is just as good as old cast iron. It's all the same material, after all.

The Theory: Metal is metal, cast iron is cast iron, the new stuff is no different than the old Wagner and Griswold pans from the early 20th century that people fetishize.

The Reality: The material may be the same, but the production methods have changed. In the old days, cast-iron pans were produced by casting in sand-based molds, then polishing the resulting pebbly surfaces until smooth. Vintage cast iron tends to have a satiny-smooth finish. By the 1950s, as production scaled up and was streamlined, this final polishing step was dropped from the process. The result? Modern cast iron retains that bumpy, pebbly surface.

The difference is more minor than you may think. So long as you've seasoned your pan properly, both vintage and modern cast iron should take on a nice nonstick surface, but your modern cast iron will never be quite as nonstick as the vintage stuff.

Myth #7: Never cook acidic foods in cast iron.

The Theory: Acidic food can react with the metal, causing it to leech into your food, giving you an off flavor and potentially killing you slowly.

The Reality: In a well-seasoned cast-iron pan, the food in the pan should only be coming in contact with the layer of polymerized oil in the pan, not the metal itself. So in a perfect world, this should not be a problem.

But, none of us is perfect, and neither are our pans. No matter how well you season, there's still a good chance that there are spots of bare metal, and these can indeed interact with acidic ingredients in your food. For this reason, it's a good idea to avoid long-simmered acidic things, particularly tomato sauce. On the other hand, a little acid is not going to hurt it. I deglaze my pan with wine after pan-roasting chicken all the time. A short simmer won't harm your food, your pan, or your health in any way.

What You SHOULD Do
These are the only rules you need to know to have a successful, lifelong relationship with your cast iron. There, was that so hard? Now, get out there and start cooking!
Advertisement